How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of steps that are unique to add a second ignition key. It requires dealer service using an electronic handheld computer called Tech-2. Then a new car key and transponder need to be bought and then programmed into the car.
It is an excellent idea to rotate your keys so that one does not get worn out more quickly than the other. This will also help to keep your keys in good condition.
Replacement Case
The new key fobs for keys are not like the older Saab keys. They are equipped with electronics that make it difficult to duplicate. This has made stealing cars considerably more difficult than it was years ago. But, it has also made the replacement of lost keys an incredibly costly endeavor.
Saab 9-3 owners should have two working keys. If one of them is lost, it costs a lot to add another to the car since it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers charge between $100-$200 to do this.
There are ways to reduce these costly. Some parts suppliers can look up the code on an extra key (usually the same one that opens the doors and turns off the ignition) and cut a brand new metal key blade at less than the dealer's cost. The key must be exactly the identical to the original one for it to work in your vehicle.
Follow these steps to replace the case. You'll require a flathead and a lot of patience. Using the screwdriver, slowly pry the plastic apart and separate the emergency key from the case. Once the case has been opened take the electronics out and put them back in your new case. Make sure to insert the correct key and badge back inside the case, too.
Replacement Battery
The replacement battery for the Saab 9-3 is an affordable part that can be replaced quickly and easily. This YouTube DIY video user Cyclone Cyd explains how to replace the battery in the remote key fob in only four steps. This tutorial is suitable for any modern saab key fob however, the procedure may differ slightly.
replacement key for saab 93 www.thekeylab.co.uk is to find the button that opens the backup key on the fob. This button is typically located on the back of your fob, next to the Saab Logo. Next take the flathead screwdriver to insert into the small hole in this button. This should be enough to allow you to open the fob case to allow you to change the battery.
Once you have installed the battery CR1632, you are able to rebuild your remote key fob. Then, you can program it into your car. The entire process shouldn't exceed an hour. It's a simple process that does not require any special tools.
If you lose a key, the procedure will be more complicated but it is still able to be done. The dealer must find the VIN number of the car and then order a new key blade and TWICE module that has the correct unique code. The dealer will then need to program the key using MDI, a new software tool.
Replacement Key Fob
The key fob is equipped with batteries that are used to lock and unlock your car. They have a limited life span and eventually will die. This is a typical issue that happens to all cars, and the good news is that you can replace the batteries in a majority of key fobs and not have to replace the entire case. Amazon sells replacement fobs that have all the electronic components installed. You can simply open the case and replace the batteries. You'll need to remove the emergency key before you can replace the batteries. To do this, place the screwdriver of a small flat head into the slot that is in the middle of the. Work the screwdriver around the case until it will split open, making it much easier to take it out.
If you're planning to replace your keys, make sure you have a spare available. This will save you a significant amount of money. If you have an additional key, request the dealer to cut it in half and program it to your vehicle. This is much less expensive than purchasing a new key fob.
It is possible to add a second key to your car in the event that you don't have one, but it requires an extensive amount of research and effort. Adding a second key costs several hundred dollars and it requires programming of the car's computer. Professionals can do this, but it's an expensive option.
Replacement Ignition
In contrast to the earlier Saab automobiles, the current SAAB 9-3 models use an advanced alarm system that is based on a coded key. This means that in the event that you lose your only working key, acquiring an additional one could be extremely costly since the car needs to have a special computer module installed, and it must also be programmed to accept an additional key. Most locksmiths cannot do this or even dealers will charge hundred dollars to program the new key!
If you've lost your only working key, a dealer will replace the computer in your car (known as the CIM or SAAB TWICE) in order to make a replacement, and they will charge a premium for it. We can reprogram the existing EEPROM on your car's computer so that it is ready to accept an additional key. This will save you more than 50% on what you would pay a dealer.
If you've owned a 9-3 from SAAB for a long time you're aware that the ignition keys aren't very durable. If your ignition key isn't working correctly, you should consider replacing it. They can become very sticky and the buttons can fall off. Fortunately, replacing the ignition key isn't as difficult as it seems and can be done in a short time with the appropriate tools.